Star TSP100 / TSP143 Receipt Paper Guide
POS Compatibility Hub › Star Micronics › TSP100 / TSP143
Model-Specific Guide
Star TSP100 / TSP143 Receipt Paper Guide
Match thermal receipt paper for Star Micronics TSP100/TSP143-series printers, including the current TSP143IV family.
Quick answer: Star's current TSP143IV specifications support 80 mm, 58 mm, and 40 mm direct-thermal media, with a maximum paper-roll diameter of 83 mm. For the common 80 mm setup, 3 1/8-inch thermal paper is the typical starting point.
RH Now TSP Paper Options
50-roll 80 mm case
3 1/8" × 230' thermal receipt paper for compatible wide-format TSP printers.
Shop 50 rolls →TSP143IV hardware
RH Now currently carries a Star Micronics TSP143IVUE thermal receipt printer.
View TSP143IVUE printer →Star TSP143IV Media Specifications
| Supported width | Use | RH Now guidance |
|---|---|---|
| 80 mm | Standard wide receipt setup | Start with 3 1/8" thermal paper and verify roll diameter. |
| 58 mm | Narrow receipt setup | Requires the appropriate paper guide/configuration. |
| 40 mm | Special narrow-media setup | Verify the exact printer configuration before ordering. |
Generation matters: TSP100/TSP143 is a family name spanning multiple generations. Always confirm the full model number and installed paper guide rather than assuming every TSP143 is configured identically.
Need help matching your exact device?
Send RH Now the full printer or POS model plus a photo of the current paper/ribbon when helpful. We can help narrow the right product before you order.
Contact RH NowBack to Compatibility HubCompatibility note: Product and system names are used only to identify equipment and supplies. Confirm the exact model, dimensions, interface, and part number before ordering. Brand names and trademarks belong to their respective owners; RH Now does not imply affiliation unless expressly stated.